Optimisation of the ultrasound-assisted extraction of betalains and polyphenols from Amaranthus hypochondriacus var. Nutrisol

The present study optimised the ultrasound-assisted extraction (UAE) of bioactive compounds from Amaranthus hypochondriacus var. Nutrisol. Influence of temperature (25.86–54.14 °C) and ultrasonic power densities (UPD) (76.01–273.99 mW/mL) on total betalains (BT), betacyanins (BC), betaxanthins (BX), total polyphenols (TP), antioxidant activity (AA), colour parameters (L*, a*, and b*), amaranthine (A), and isoamaranthine (IA) were evaluated using response surface methodology. Moreover, betalain extraction kinetics and mass transfer coefficients (K_La) were determined for each experimental condition. BT, BC, BX, TP, AA, b*, K_La, and A were significantly affected (p < 0.05) by temperature extraction and UPD, whereas L*, a*, and IA were only affected (p < 0.05) by temperature. All response models were significantly validated with regression coefficients (R²) ranging from 87.46 to 99.29%. BT, A, IA, and K_La in UAE were 1.38, 1.65, 1.50, and 29.93 times higher than determined using conventional extraction, respectively. Optimal UAE conditions were obtained at 41.80 °C and 188.84 mW/mL using the desired function methodology. Under these conditions, the experimental values for BC, BX, BT, TP, AA, L*, a*, b*, K_La, A, and IA were closely related to the predicted values, indicating the suitability of the developed quadratic models. This study proposes a simple and efficient UAE method to obtain betalains and polyphenols with high antioxidant activity, which can be used in several applications within the food industry.     

System-size effect on the friction at liquid-solid interfaces

The friction at the liquid-solid interfaces is widely involved in various phenomena ranging from nanometer to micrometer scales. By the molecular dynamic(MD)simulation, the friction properties of liquid-solid interfaces at the molecular level are calculated via the Green-Kubo relation. It is found that the system size will influence the value of the friction coefficient, especially for the solid surfaces with the larger polar charge. The value of the friction coefficient decreases with the increase in the system size and converges at large system sizes. The large polar charge will lead to a significant friction coefficient. However, the diffusion of water molecules on this surface is almost a constant, indicating that the diffusion coefficient seems to be independent of the system size and polar charge. This work provides insights for the selection of the system size in modeling the frictional properties of hydrophobic/hydrophilic surfaces.     

甲烷浓度对碳化硅基底金刚石薄膜摩擦性能影响

利用热丝化学气相沉积法(HFCVD)在碳化硅基底上制备金刚石薄膜,采用场发射扫描电子显微镜、拉曼光谱仪、原子力显微镜研究了在不同甲烷浓度条件下制备的金刚石薄膜表面形貌及物相组成,在干摩擦条件下通过往复式摩擦磨损实验测试并计算了已制备金刚石薄膜的摩擦系数和磨损率,结合物相分析及摩擦磨损实验结果分析了甲烷浓度的改变对金刚石薄膜摩擦磨损性能的影响。结果表明,由于甲烷气体含量的升高,金刚石薄膜结晶质量下降,薄膜由微米晶向纳米晶转变。摩擦磨损实验结果显示:3%甲烷浓度条件下制备的金刚石薄膜耐磨性较好,磨损率为2.2×10^-7 mm³/mN;5%甲烷浓度条件下制备的金刚石薄膜摩擦系数最低(0.032),磨损率为5.7×10^-7 mm³/mN,制备的金刚石薄膜的耐磨损性能相比于碳化硅基底(磨损率为9.89×10^-5 mm³/mN)提升了两个数量级,显著提高了碳化硅基底的耐磨性。     

Analytical and numerical studies for Seiches in a closed basin with bottom friction

A standing wave oscillation in a closed basin, known as a seiche, could cause destruction when its period matches the period of another wave generated by external forces such as wind, quakes, or abrupt changes in atmospheric pressure. It is due to the resonance phenomena that allow waves to have higher amplitude and greater energy, resulting in damages around the area. One condition that might restrict the resonance from occurring is when the bottom friction is present. Therefore, a modified mathematical model based on the shallow water equations will be used in this paper to investigate resonance phenomena in closed basins and to analyze the effects of bottom friction on the phenomena. The study will be conducted for several closed basin shapes. The model will be solved analytically and numerically in order to determine the natural resonant period of the basin, which is the period that can generate a resonance. The computational scheme proposed to solve the model is developed using the staggered grid finite volume method. The numerical scheme will be validated by comparing its results with the analytical solutions. As a result of the comparison, a rather excellent compatibility between the two results is achieved. Furthermore, the impacts that the friction coefficient has on the resonance phenomena are evaluated. It is observed that in the prevention of resonances, the bottom friction provides the best performance in the rectangular type while functioning the least efficient in the triangular basin. In addition, non-linearity effect as one of other factors that provide wave restriction is also considered and studied to compare its effect with the bottom friction effect on preventing resonance.     

体外预应力梁摩擦效应的非线性分析

构造了简单的体外预应力梁的摩擦单元,摩擦单元位于转向块和体外筋之间的角平分线上,能模拟转向块和体外筋之间的有摩擦或无摩擦滑移。考虑混凝土、钢筋和体外筋应力-应变的非线性关系,采用梁截面弯矩-轴力-曲率的三折线模型,探讨了体外预应力梁的性能。对简支梁和连续梁的不同因素进行计算,包括不同摩擦系数、不同体外筋和钢筋面积、不同偏心距以及对称和非对称荷载形式。计算结果表明,对于简支梁和对称荷载下的连续梁,承载力的摩擦效应可以忽略,最大预应力增量和挠度的摩擦效应不宜忽略,最小预应力增量的摩擦效应明显;对于非对称荷载下的连续梁,承载力、最大和最小预应力增量以及挠度的摩擦效应不可忽略。     

Effect of the order of Ni and Ce addition in SBA-15 on the activity in dry reforming of methane

Dry reforming of methane has been carried out on SBA-15 catalysts containing 5 wt% Ni and 6 wt% Ce. The effect of the order of Ni and Ce impregnation on the catalytic activity has been studied. Both metals were added using the “two-solvent” method that favors metal dispersion inside the pores. Characterizations by XRD (low and high angles), N₂ sorption, SEM and TEM of the materials after metal addition and calcination indicate good preservation of the porosities and high NiO and CeO₂ dispersion inside the porous channels. Reduction was carried out before the catalytic tests and followed by TPR measurements. The most active reduced catalyst was the Ni–Ce/SBA-15 sample prepared by impregnating cerium first, then nickel. All catalysts were highly active and selective towards H₂ and CO at atmospheric pressure. Full CH₄ conversion was obtained below 650 °C. The higher performances compared to those reported in the literature for mesoporous silica with supported Ni and Ce catalysts are discussed.     

三功能策略设计制备具有优异低温抗积碳性能的Ni-CeO2@SiO2催化剂催化甲烷干重整反应

随着全球人为温室气体排放量(主要是甲烷和二氧化碳)的增加,全球变暖的趋势逐渐增加,因此,迫切需要通过各种技术来捕获和利用这些温室气体.甲烷干气重整反应(DRM)可以有效地将甲烷和二氧化碳这两种资源丰富、价格低廉的温室气体转化为高附加值化学品,减少它们向大气排放.尽管DRM工艺的应用具有许多优势,但是反应期间碳沉积和活性组分的烧结是阻碍其工业应用的两个主要原因.这些碳沉积物可能覆盖活性中心或阻塞催化剂的孔道,从而导致催化剂活性降低.镍基催化剂因其价格低廉、初始活性高和资源丰富而得到广泛的应用.但应用于DRM反应的Ni基催化剂在反应中容易烧结和积碳,导致催化剂迅速失活.为解决上述问题,本文从三功能策略角度出发,即SiO2壳层的限域作用和Ni-Ce之间的协同作用以及CeO2的消除积碳作用,采用原位一锅法设计合成了一种限域型Ni-CeO2核壳结构催化剂(Ni-CeO2@SiO2).通过X射线衍射、透射电子显微镜、能量色散X射线光谱、N2吸附/脱附、氢气程序升温还原和脱附、氧气程序升温脱附、拉曼光谱、热重分析和原位漫反射红外傅里叶变换光谱测试对催化剂进行了系统的表征,来揭示催化剂的理化性质和反应机理.催化剂应用于甲烷干气重整反应结果表明,在温度区间为550～800℃时,与传统浸渍法合成的催化剂相比,Ni-CeO2@SiO2催化剂具有更高的活性.高温800℃下的稳定性测试结果显示,传统浸渍法合成的催化剂在反应20 h后就出现了大量的积碳且活性下降明显;而Ni-CeO2@SiO2催化剂在800℃下反应100 h后未检测到积碳,并且催化剂中的Ni纳米颗粒的平均粒径从5.01 nm仅增长到5.77 nm,表现出很好的高温抗积碳和耐烧结性能.值得注意的是,Ni-CeO2@SiO2催化剂在低温600℃(形成碳沉积的最可能温度区域)下反应20h后也未检测到积碳的形成,表现出催化剂良好的低温稳定性和抗积碳性能.这可能归因于对Ni-CeO2@SiO2催化剂的三功能作用,即多孔二氧化硅壳层的限域作用、Ni与CeO2之间强的金属-金属氧化物相互作用以及具有丰富活性氧物种CeO2的消除积碳的作用.通过原位漫反射红外傅里叶变换光谱测试来探究反应机理.结果 表明,DRM反应在Ni-CeO2@SiO2催化剂上遵循L-H机理,添加CeO2可以消除碳沉积并促进CO2活化.该三功能策略为设计其他应用于DRM的高性能催化剂提供了指导,有望加快该工艺的工业化.     

Crosslinked Hyaluronic Acid with Liposomes and Crocin Confers Cytoprotection in an Experimental Model of Dry Eye

Dry eye disease (DED) is a multifactorial condition caused by tear deficiency and accompanied by ocular surface damage. Recent data support a key role of oxidative and inflammatory processes in the pathogenesis of DED. Hyaluronic acid (HA) is widely used in artificial tears to treat DED by improving ocular hydration and reducing surface friction. Crocin (Cr), the main constituent of saffron, is a renowned compound that exhibits potent antioxidant and anti-inflammatory effects. The present study was undertaken to assess the viscosity and muco-adhesiveness of a photoactivated formulation with crosslinked HA (cHA), Cr, and liposomes (cHA-Cr-L). Our aim was also to evaluate whether cHA-Cr-L may exert cytoprotective effects against oxidative and inflammatory processes in human corneal epithelial cells (HCECs). Viscosity was measured using a rotational rheometer, and then the muco-adhesiveness was evaluated. Under hyperosmolarity (450 mOsm), the HCECs were treated with cHA-Cr-L. Interleukin-1β (IL-1β) and tumor necrosis factor α (TNFα) were quantified by quantitative real-time polymerase chain reaction (RT-qPCR). The levels of reactive oxygen species (ROS) were measured using the DCF assay. The combined action of cHA-Cr-L produced a higher viscosity and muco-adhesiveness compared to the control. The anti-inflammatory effect of cHA-Cr-L was achieved through a significant reduction of IL-1β and TNFα (p < 0.001). The results also showed that cHA-Cr-L reduces ROS production under conditions of hyperosmolarity (p < 0.001). We conclude that cHA-Cr-L has potential as a therapeutic agent in DED, which should be further investigated.